人妻中出无码中字在线_午夜国产精品视频免费看电影_超碰CAO已满18进入_桃色AV无码_亚洲成年网站在线隔壁老王_55大东北熟女啪啪嗷嗷叫_国内a级一片免费av_欧美乱片欧美成人乱片

<br />
<b>Warning</b>:  Use of undefined constant wp_title - assumed 'wp_title' (this will throw an Error in a future version of PHP) in <b>/www/wwwroot/songjiangjituan.com/wp-content/themes/onii/header-pc.php</b> on line <b>27</b><br />

安裝說明VIEWS

【中英文】不銹鋼金屬軟管安裝說明


來源:http://m.hehops.com/1558.html 發布于:2018-11-14 04:13   瀏覽:4,889

【中英文】不銹鋼金屬軟管安裝說明“全球通用”
【中英文】不銹鋼金屬軟管安裝說明

Key factors for installation

安裝的關鍵因素
Following advises are however to be taken into consideration in order to obtain a good performance and prolonged of the expansion joint.
注意:為了獲得良好的性能和延長伸縮縫的使用壽命,必須考慮以下建議。
Fixed points
固定點
An expansion joint acts as a piston by the forces arising from the internal pressure.To prevent the pipes from damage they are to be properly anchored in order to take care of these reaction forces (Fr).
金屬軟管由內部壓力產生的力作用于活塞,為了防止管道受到損壞,必須將管道固定起來,以處理這些反作用力(FR)。
The Reaction force of an expansion joint is calculated by the following formula:
金屬軟管的反力計算公式如下:
Fr = Q x P x 0.01
Fr = reaction force in kN.
Q = effective cross sectional area in cm2.
P = actual pressure in bar or kp/cm2
Mounting
安裝
Before installation, the temperature, pressure and displacement of the product should be strictly used.
安裝前應嚴格在產品允許的溫度、壓力和位移量范圍內使用!
The expansion joints shall be easily accessible and open to regular supervision. Lt is recommended to let the expansion joints work in compression rather than stretching. Torsion is not permitted.
金屬軟管應很容易的定期檢查。我建議金屬軟管的工作是壓縮,而不是拉伸,更不允許扭轉。
Maintenance instructions: observe whether the expansion jointt is over stretched and keep the expansion joint in normal length every month.
保養須知:每月要觀察金屬軟管是否超位移拉長,保持金屬軟管在正常長度內使用。
In order to ensure the expansion capacity, the bolts should be kept as small as possible (not exceeding 2 mm or 3mm) to avoid damaging the metal hose body.
為了保證伸縮能力,裝配螺栓要確保螺紋螺栓盡量少(不超過2毫米或3mm),以避免損壞金屬軟管本體。
Precaution
預防措施
When welding work is to take place the bellow has to be protected from welding heat and sparks.
當焊接工作發生時,金屬軟管本體必須防止焊接發熱和火花。
Please install an effective chlorine removal device at the inlet of the pipeline (chloride content is not more than 25mg/l) to avoid excessive chlorine content and pinhole corrosion.
請?jiān)诠艿肋M(jìn)水口加裝有效去除氯離子裝置(氯離子含量不超過25mg/l),避免水氯離子含量超標,產生針孔腐蝕。

Shanghai Songjiang Shock Absorber Group Co.,Ltd.

上海淞江減震器集團有限公司相關下載:【中英文】不銹鋼金屬軟管安裝說明









最新推薦:
  • ·溴化鋰吸收式制冷機彈簧減震器發貨
  • ·【OEM】DN300單球橡膠接頭代工“無標”
  • ·水上樂園水循環系統異徑橡膠接頭準備發往廣州
  • ·【國家中影電影數字制作基地】動力橡膠接頭合同
  • ·【海南?;◢u1號島項目】橡膠接頭合同
  • ·【專利證書】新型橡膠接頭法蘭
  • ·【湖南羅森尼娜食品】波紋補償器合同
  • ·【新化化工項目】橡膠接頭案例
  • ·2016年年底總結會議現場
  • ·【常熟捷達消防科技消防車】橡膠接頭合同